How to Replace Door Locks
Replacing the door lock could be a difficult task. It is essential to protect your home from burglars and to change locks if you have an occupant change or you are letting out your home.
Most new locks have been made to fit standard width doors. If your door is more thick, you will need a "thick-door" kit that has longer screws and longer tail pieces for deadbolts.
Removing the old lock
You will need to remove your old door lock from the door before you install the new one. You can do this using a few simple tools, but be careful not to damage your door or frame. Using the right tools will save you money on repairs in the future.
Begin by removing the screws that hold the handle and trim. You can use a screwdriver to do this. Once the screws have been removed, you can remove the trim. You will then be able to gain access to the screw that binds the handle and trim to the door. After you have removed the screw, you can remove the lock cylinder as well as open the handle.
One of the most obvious indicators that your lock is failing is when you can no longer turn the key inside. upvc window lock replacement is due to the tumblers getting worn out and eventually will stop moving up or down, disabling the lock's ability to function. If this happens, you'll need to bring the lock to a locksmith in order to be reset-keyed.
Start by removing the screws holding the faceplate to its place. If your kit does not include new screws, then you can purchase them at a hardware shop. If you're installing a mortise lock it is also necessary to remove the screws holding the external roseplate to the door. After you've removed the screws pull the dead bolt and plate away from the door.
Then, search for a hole in the interior handle trim. If you spot a pinhole you can insert a straightened safety pin into it. You can also employ a flat screwdriver press against the depression. This should loosen the handle and expose screws which can be removed to take the entire lock case from the door.
Installing the new lock
If you're looking to change your lock after a break-in or simply want to improve the appearance of your door, installing an entirely new lock is easy. However, it's important to measure the door to ensure that you buy the right lock that is the right size for your door. This is particularly important for deadbolts, which need to be a certain size in order to fit into the strikeplate and bolt pocket. Ask your local hardware store for advice if you aren't sure what measurement to take.
If you're replacing mortice locks, use the existing centre rail as a guide for positioning the new mortise lock. After you've marked the location of the lock, drill holes on the centre line which are the same width as your lock. Then, you can chisel the wood until you have a clean rectangular space for the mortice lock to fit into. Insert the lock, and then outline the faceplate with the marking blade. Mark and drill screw holes to fix the faceplate.
You can save money when rekeying locks by purchasing a starter set that includes keys that can be re-keyed and an unlocked key. These kits are available from numerous online retailers and also from home improvement and hardware stores. These kits also come with instructions to assist you in completing your task.
If you're renting, make sure to read the lease agreement prior to changing locks. You may have to give the landlord the keys to the new locks. If so, you might be required to take out the old lock and replace it with a standard lock. You can buy a basic lock at your local hardware store, or you can purchase an advanced lock that is connected to your home's WiFI network and allows you lock and unlock the door from a distance. An ideal choice is a Schlage Smart Lock, which can be used with a variety of door levers and knobs. This system can also be linked to your home security hub that is smart, allowing you to receive alerts when your door is opened or locked.
Installing a new lock
A broken lock is an enigma for security, which is why it is essential to replace it as quickly as possible. It's simple to replace locks for doors. The first step is to take the lock that was used to secure the door. This is done by unscrewing the screws that secure it and then removing it. Depending on the kind of lock you have, you might need an Allen wrench or a screwdriver. Save all the components of the old lock and put them in a secure place.
Then, insert the new lock on the door. The majority of kits come with an image of the cardboard template that shows how the lock should be placed on the door. If the template doesn't fit your door, use a pencil to trace around it or a the chisel to get rid of extra material. Once the new lock is installed, ensure that the interior latch plate aligns with the mortise lockset hole to ensure a secure fit.
Be cautious not to over tighten the lock when you install it. This could cause the lock to squeak or even break. If you have a lock with keys make sure the spindle is aligned with the hole in the knob. If it isn't then you can use a screwdriver to push the spindle into the lock and into the knob.
After you've installed the new lock, you can now install the base plate that comes with it. If the lock does not come with base plates then you can purchase one that is compatible with your hardware.
The final step is to test the lock to ensure it works. This can be done by inserting the lock key and turning the lock so that it opens. If this doesn't work, you must seek out a locksmith.
Rekeying your locks with an expert can help prevent break-ins. This involves changing the internal tumblers on your locks to make it insensitive to the keys you have previously used. This will help you to feel secure and secure at home.
Test the new lock
If you're installing a new lock you need to ensure that it works as intended. This is why it's important to follow the guidelines carefully. If you don't follow them, you could not be capable of opening your door. You can ask a locksmith for assistance when you're not sure what to do. A locksmith can also give suggestions on the most suitable locks for your home.
If you're having trouble opening your lock, there might be a problem with the handle or latch. You can lubricate the latch using graphite or spray it with WD-40. This may fix the problem. It may be necessary to replace the latch if it is damaged. latch is not working properly.
Another possibility is that the lock has been installed incorrectly. The door handle clip may be damaged or missing from the new lock. In this instance you need to grasp the handle from the inside, and insert an additional plastic retainer clip. The handle is then linked to the lock and the lock will be tested.
After you've replaced the lock it's important to check the keypad to make sure it's functioning properly. You can test it by placing the key inside and turning it. If the keypad is working correctly, it should be able to unlock and lock your door.
Check the deadbolt to make sure it's functioning properly. If it's not working, take off the latch from the door and take off the Phillips-head screws. Replace the deadbolt that was installed with the new one. The deadbolt should be oriented and loaded lock properly.
Another method of testing the new lock is to perform the spindle test. This can be performed by inserting an instrument into the spindle. This test should always be performed before reinstalling the lock to ensure that there aren't any mistakes.